DBX1046V-EU

Manufacturer :-

EFFECT & SIGNAL PROCESSORS

New product

₹ 40,158.00 tax excl.

1046

Quad Compressor / Limiter

More details

Add to wishlist

10 Items

share

Features

  • Four independent channels of operation, stereo linkable in two pairs
  • PeakStopPlus™ limiting control for setting maximum allowable level regardless of compressor settings
  • Independent Threshold and ratio controls
  • Switchable OverEasy® or Hard Knee compression
  • Classic dbx® compression
  • Differentially balanced gold-plated XLR and 1/4" inputs and outputs
  • True RMS level detection
  • Precision metering of input level, output level, and gain reduction
  • Dual True stereo or quad mono operation
  • Switchable +4dBu or -10dBV operation per channel

Specifications

Input ConnectorsXLR and 1/4" TRS (Pin 2 and tip hot)
Input TypeElectronically balanced/unbalanced, RF filtered
Input ImpedanceBalanced > 40 kOhm, unbalanced >20 kOhm
Max Input> +22 dBu balanced or unbalanced
CMRRTypically >50 dB at 1 kHz
Output ConnectorsXLR and 1/4" TRS (Pin 2 and tip hot)
Output TypeServo-balanced/unbalanced, RF filtered
Output ImpedanceBalanced 30 Ohm, unbalanced 15 Ohm
Max Output> +22 dBm balanced, > +20 dBm unbalanced
Bandwidth20 Hz to 20 kHz, +0/-0.5 dB
Frequency Response0.35 Hz to 90kHz, +0/-3 dB
Noise< -96 dBu, unweighted, 22 kHz measurement bandwidth
Dynamic Range> 118 dB, unweighted
THD+Noise>0.008% typical at +4 dBu (1 kHz unity gain), 0.08% typical at +20 dBu (1 kHz unity gain), < 0.1% any amount of compression up to 40 dB, 1 kHz
IMD< 0.1% SMPTE
Interchannel Crosstalk< -80 dB 20Hz to 20 kHz
Stereo CouplingTrue RMS Power Summing
Compressor Threshold Range-40 dBu to +20 dBu
Compressor Ratio1:1 to infinity:1
Compressor Threshold CharacteristicSelectable OverEasy® or hard knee
Compressor Attack/Release CharacteristicAutoDynamic™
Compressor Attack TimeProgram-dependent
Compressor Release TimeProgram-dependent
Compressor Output Gain-20 to +20 dB
Limiter Threshold Range0 dBu to +24 dBu (off)
Limiter Ratioinfinity:1
Limiter TypePeakStopPlus® two-stage limiter
Limiter Stage 1PeakStop® brickwall limiter
Limiter Stage 1 Attack TimeZero
Limiter Stage 1 Release TimeZero
Limiter Stage 2Predictive intelligent program limiter
Limiter Stage 2 Attack TimeProgram-dependent
Limiter Stage 2 Release TimeProgram-dependent
OverEasy® SwitchActivates the OverEasy compression function
I/O Meter SwitchSwitches between monitoring input and output levels on the Input/Output Level meter
Bypass SwitchActivates the direct input-to-output hard-wire bypass
Operating Level Switch(rear panel) Switches the nominal operating level between -10 dBV and +4 dBu simultaneously for both input and output levels
ST Link SwitchLinks channels in stereo pairs. Channels One and Three become the master channels
Gain Reduction Meter8 segment LED bar graph at 1, 3, 6, 10, 15, 20, 25, and 30 dB
I/O Meter8-segment LED bar graph at -24, -18, -12, -6, 0, +6, +12, and +18 dBu
PeakStop™ Indicator1 LED to indicate PeakStop™ limiting
Function SwitchesLED indicator for each front-panel switch
Output Transformer OptionsJensen® JT-123-dbx or JT- 11-dbx, BCI RE- 123-dbx or RE-11-dbx
Operating VoltageSwitchable:100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz
Power Consumption20 Watts
Fuse100-120 VAC:250 mA Slow Blow, 200-240 VAC:125 mA Type T
Power ConnectorIEC receptacle
Dimensions1.75"Hx19"Wx9"D (4.4cmx48.3cmx20.1cm)
Unit Weight5.2 lbs. (2.4 kg)
Shipping Weight7.6 lbs. (3.5 kg)

No customer reviews for the moment.

Write a review

DBX1046V-EU

DBX1046V-EU

1046

Quad Compressor / Limiter

29 other products in the same category: