Latest Products
SE2200
- Product SKU: Studio
- Category: Large Diaphragm, Microphone, Products, Studio Mics, Wired
- Order within
State-of-the-art components and a shorter, optimized signal path provide even better noise performance & clarity, new pad & filter options increase its versatility, and the fit & finish has been updated with sE’s latest manufacturing techniques - but the sE2200 retains all the classic sound of the original.
HANDCRAFTED 1" TRUE CONDENSER CAPSULE
Although the sE2200 is a cardioid-only microphone, two (instead of one) gold-sputtered diaphragms are used to ensure best possible acoustic performance.
Built like the world’s finest musical instruments, every capsule is hand-crafted and individually tuned in our very own factory in Shanghai - and unlike other microphones with backplate or electret designs, the sE2200 features a true externally polarized condenser capsule, and therefore delivers the best possible performance in every aspect.
TRADITIONAL CLASS-A ELECTRONIC DESIGN
Its carefully selected, discrete components ensure brilliant sound quality on any source. The sE2200’s design still avoids using any ICs (integrated circuits) and is built to excel – not to a standard. Low noise, consistent performance and high sensitivity is provided by state-of-the-art surface-mounted electronic components with extremely tight tolerances.
TWO SWITCHABLE ATTENUATION LEVELS & LOW-CUT FILTERS
The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide variety of applications and close-mic techniques for even the loudest instruments...think super-heavy electric guitars, fortissimo brass instruments, and heavy-footed kick drums.
Selectable at either 80Hz or 160Hz, the two low-cut filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques.
CUSTOM-BUILT OUTPUT TRANSFORMER
Reviving the spirit of classic studio microphones, the sE2200’s custom transformer provides superb depth & weight to the overall sonic image, and the massively shielded metal housing ensures noise-free operation.
ALL-METAL HOUSING & PREMIUM FINISH
Unlike the cheaply constructed bodies of some other affordable microphones, the sE2200's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish ensures a great look for years to come.
Capsule Type: Hand-crafted 1" True Condenser
Polar Pattern: Cardioid
Frequency range: 20 Hz - 20 kHz
Sensitivity: 23.7 mV/Pa (-32.5 dBV)
Max SPL: 125 / 135 / 145 dB (0/10/20 dB pad) (0.5% THD @ 1kHz)
Equivalent noise level: 8 dB(A)
Dynamic range: 117 / 127 / 137 dB (0/10/20 dB Attentuation pad)
Signal to Noise Ratio: 86 dB
Low-cut filter: 80 / 160 Hz, 6 dB/Oct, switchable
Attenuation Pad: 10 / 20 dB, switchable
Powering: 48 Volts according to IEC 61938
Electrical Impedance: <50 Ohms
Recommended load impedance: >1k Ohms
Current consumption: 4.2 mA
Connectivity: 3-pin male XLR connector
Dimensions: Diameter: 51mm (2.01 in), Length 215mm (8.46 in)
Weight: 611 g (21.55 oz.)
IN THE BOX:
-
sE2200 Studio Condenser Microphone
-
Isolation Pack (shockmount, pop filter)
-
Thread adapter
-
sE Logo sticker
-
User manual with warranty card
State-of-the-art components and a shorter, optimized signal path provide even better noise performance & clarity, new pad & filter options increase its versatility, and the fit & finish has been updated with sE’s latest manufacturing techniques - but the sE2200 retains all the classic sound of the original.
HANDCRAFTED 1" TRUE CONDENSER CAPSULE
Although the sE2200 is a cardioid-only microphone, two (instead of one) gold-sputtered diaphragms are used to ensure best possible acoustic performance.
Built like the world’s finest musical instruments, every capsule is hand-crafted and individually tuned in our very own factory in Shanghai - and unlike other microphones with backplate or electret designs, the sE2200 features a true externally polarized condenser capsule, and therefore delivers the best possible performance in every aspect.
TRADITIONAL CLASS-A ELECTRONIC DESIGN
Its carefully selected, discrete components ensure brilliant sound quality on any source. The sE2200’s design still avoids using any ICs (integrated circuits) and is built to excel – not to a standard. Low noise, consistent performance and high sensitivity is provided by state-of-the-art surface-mounted electronic components with extremely tight tolerances.
TWO SWITCHABLE ATTENUATION LEVELS & LOW-CUT FILTERS
The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide variety of applications and close-mic techniques for even the loudest instruments...think super-heavy electric guitars, fortissimo brass instruments, and heavy-footed kick drums.
Selectable at either 80Hz or 160Hz, the two low-cut filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques.
CUSTOM-BUILT OUTPUT TRANSFORMER
Reviving the spirit of classic studio microphones, the sE2200’s custom transformer provides superb depth & weight to the overall sonic image, and the massively shielded metal housing ensures noise-free operation.
ALL-METAL HOUSING & PREMIUM FINISH
Unlike the cheaply constructed bodies of some other affordable microphones, the sE2200's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish ensures a great look for years to come.
Capsule Type: Hand-crafted 1" True Condenser
Polar Pattern: Cardioid
Frequency range: 20 Hz - 20 kHz
Sensitivity: 23.7 mV/Pa (-32.5 dBV)
Max SPL: 125 / 135 / 145 dB (0/10/20 dB pad) (0.5% THD @ 1kHz)
Equivalent noise level: 8 dB(A)
Dynamic range: 117 / 127 / 137 dB (0/10/20 dB Attentuation pad)
Signal to Noise Ratio: 86 dB
Low-cut filter: 80 / 160 Hz, 6 dB/Oct, switchable
Attenuation Pad: 10 / 20 dB, switchable
Powering: 48 Volts according to IEC 61938
Electrical Impedance: <50 Ohms
Recommended load impedance: >1k Ohms
Current consumption: 4.2 mA
Connectivity: 3-pin male XLR connector
Dimensions: Diameter: 51mm (2.01 in), Length 215mm (8.46 in)
Weight: 611 g (21.55 oz.)
IN THE BOX:
-
sE2200 Studio Condenser Microphone
-
Isolation Pack (shockmount, pop filter)
-
Thread adapter
-
sE Logo sticker
-
User manual with warranty card
Shipping Policy
VMT offers insured shipping extra to almost all Pin Codes in the country. We use the standard shipping mode and operate via our logistics partners who are amongst the best in the country for product shipping.
7 Day Easy-Refund Policy
Receive a refund for any reason if you return a product within 7 days of your delivery date that is still in brand new condition with the original packaging and with all items delivered with the product.
Missing/Damaged Fee
For products returned with the following conditions below, a 15% product missing/damaged fee will be deducted from the refunded amount.
- Wear and tear on the product like small scratches and dents
- Missing box items like an owner’s manual or software/ driver CD’s, etc.
- Damage or dents incurred during the return shipping process
- Tampered / Missing barcode from the product
Refunds will not be processed for products with more significant damage or missing significant accessories, like connector cables, or DC power supplies.
Return Policy Exceptions
- Products received with physical damage must be reported to VMT within 2 days of the delivery date.
- Products received with missing accessories should be reported within 5 days of the delivery date. Claims made post this period will not be honoured.
- Products purchased as Open Box cannot be returned. All Open Box sales are final. Open Box products have been tested and are guaranteed to be functional. If you have a reason to believe that your open box product is non-functional, please contact us on helpdesk@VMT.com with video evidence. Product malfunction for open-box products is covered by VMT, and they enjoy a 2-year Standard VMT warranty as all other products.( open Box B stock products are covered by a 1 year warranty)
- We do not accept returns for the following items:
- Opened software products.
- All products with manufacturer seal. Once the seal is opened it cannot be assigned to another user, and hence vmt cannot accept the return unless there is a case of product malfunction.
- Audio Interfaces, Midi Keyboards or any other product that entails registration in order to be used. Once registered, the product cannot be reassigned, and hence VMT cannot accept the return.
- Gift Cards and Gift Vouchers
- Products damaged due to the use of an inappropriate power supply or products that were damaged due to voltage stability issues will not be accepted as returns.
- Products that show wilful damage will not be accepted as returns.
Note* - In case VMT is unable to pick-up your shipment due to certain unforeseen circumstance, you may have to ship the products to our facility. The logistic charges involved in these cases would be refunded back to you after the product reaches us.
Return Shipping
VMT shall bear the cost of the return shipping to all Pin Codes that can avail free shipping. In case VMT cannot arrange a pickup, you can send the shipment back by requesting a Free Shipping Coupon (Due to lockdowns and limited service in certain areas) For products that weigh over 30 Kg, the cost of shipping will be borne by the customer.
Return Process
If you would like to return a product, it is required to call us as soon as possible at +91-22-43432222. All returns must be authorised and the return shipment must be mailed within 15 days of receiving the original shipment.
The refund will be initiated only after the package has been received back at our facility. The refunded amount will be transferred, as per banking and payment gateway norms, within 5 to 7 business days of the receipt of the returned shipment.
VMT’s address : Send your return to:
Vardhaman Megatech Pvt. Ltd,
The Online Returns Dept., Vardhaman House, DL Road, Kalachowki, Mumbai 400033
