E 12:2
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
Our Categories
Latest Products

E 12:2

Available: In Stock
Rs. 127,960.00
Image
  • Order within

Product Features

  • 1,200 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost

  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs

  • Flexible IntelliDrive permits delivering the 2 x 600 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel

  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization

  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems

  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance

  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions

  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles

  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads

  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch

  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning

  • Efficient cooling with temperature-controlled fan with front to back airflow

  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs

  • GPIO connector with power control and indication for further system integration

  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals

Specification:

General
Number of amplifier channels

2

Max total output all channels driven

1200 W

Peak output voltage per channel

100 V / 70 Vrms

Max. output current

18 Arms

Max output power (all channels driven)
2 ohms

600 W

4 ohms

600 W

8 ohms

600 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 300 W)

16 ohms

310 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 150 W)

70 V

600 W

100 V

Can deliver 600 W to a 100 V load tapped at 1200 W

Performance
THD 20 Hz - 20 kHz at 1 W

<0.1%

THD at 1 kHz and 1 dB below clipping

<0.05%

Signal to Noise Ratio

>112 dBA

Channel separation (Crosstalk) at 1 kHz

>70 dB

Frequency Response

2 Hz - 40 kHz

Input impedance

20 kOhm

Common Mode Rejection (CMR)

50 dB

Output impedance

25 mOhm

Gain, Sensitivity and Limiters
Limit and gain switch defining limit and gain (per channel)

2 pos: Lo-Z and 70 V

VPL for 70 V mode

100 V

VPL for Lo-Z mode

69.3 V

Sensitivity for stated power into 4 Ohm in Lo-Z mode

4 dBu

Sensitivity for 70.7 V out in 70 V mode

4 dBu

Sensitivity for stated power into 2 Ohm in Lo-Z mode

1 dBu

Sensitivity for stated power into 8 Ohm in 70 V mode

3.8 dBu

Sensitivity for stated power into 16 Ohm in 70 V mode

4 dBu

Gain in 70 V mode

35.2 dB

Gain in Lo-Z mode

32 dB

Level adjustment (per channel)

Rear panel potentiometer, from -inf to 0 dB

Connectors and Buttons
Input connectors (per ch.)

3 - pin detachable screw terminals, electronically balanced

Output connectors (per ch.)

2 - pin detachable screw terminals

High pass filter

Fixed at 50 Hz, switchable per channel

Power control

Can be used to go between standby and ON

GPI (power control input)

Contact closure type, 2-pin detachable screw terminal, controls the power state

GPO (power state output)

Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state

Cooling

Single fan, front to rear airflow, no filter required, temperature controlled speed

Power
Nominal voltage

100 – 240 VAC

Operating voltage

70 – 265 VAC

Standby consumption

<1 W

Mains connector

IEC inlet

Dimensions
Dimensions

W: 483 mm (19”), H: 44 mm (1 U), D: 276 mm (10.9”)

Weight
Weight

4.2 kg (9.3 lbs)

Finish
Finish

Dark grey aluminum front and black steel chassis

Approvals
Approvals

CE, RoHS, WEEE, UL (UL 60065), CSA C22.2 NO. 60065, FCC Part 15 Subpart B Class A, PSE, CCC Energy Star

Product Features

  • 1,200 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost

  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs

  • Flexible IntelliDrive permits delivering the 2 x 600 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel

  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization

  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems

  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance

  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions

  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles

  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads

  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch

  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning

  • Efficient cooling with temperature-controlled fan with front to back airflow

  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs

  • GPIO connector with power control and indication for further system integration

  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals

Specification:

Number of amplifier channels

2

Max total output all channels driven

1200 W

Peak output voltage per channel

100 V / 70 Vrms

Max. output current

18 Arms

Max output power (all channels driven)
2 ohms

600 W

4 ohms

600 W

8 ohms

600 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 300 W)

16 ohms

310 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 150 W)

70 V

600 W

100 V

Can deliver 600 W to a 100 V load tapped at 1200 W

Performance
THD 20 Hz - 20 kHz at 1 W

<0.1%

THD at 1 kHz and 1 dB below clipping

<0.05%

Signal to Noise Ratio

>112 dBA

Channel separation (Crosstalk) at 1 kHz

>70 dB

Frequency Response

2 Hz - 40 kHz

Input impedance

20 kOhm

Common Mode Rejection (CMR)

50 dB

Output impedance

25 mOhm

Gain, Sensitivity and Limiters
Limit and gain switch defining limit and gain (per channel)

2 pos: Lo-Z and 70 V

VPL for 70 V mode

100 V

VPL for Lo-Z mode

69.3 V

Sensitivity for stated power into 4 Ohm in Lo-Z mode

4 dBu

Sensitivity for 70.7 V out in 70 V mode

4 dBu

Sensitivity for stated power into 2 Ohm in Lo-Z mode

1 dBu

Sensitivity for stated power into 8 Ohm in 70 V mode

3.8 dBu

Sensitivity for stated power into 16 Ohm in 70 V mode

4 dBu

Gain in 70 V mode

35.2 dB

Gain in Lo-Z mode

32 dB

Level adjustment (per channel)

Rear panel potentiometer, from -inf to 0 dB

Connectors and Buttons
Input connectors (per ch.)

3 - pin detachable screw terminals, electronically balanced

Output connectors (per ch.)

2 - pin detachable screw terminals

High pass filter

Fixed at 50 Hz, switchable per channel

Power control

Can be used to go between standby and ON

GPI (power control input)

Contact closure type, 2-pin detachable screw terminal, controls the power state

GPO (power state output)

Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state

Cooling

Single fan, front to rear airflow, no filter required, temperature controlled speed

Power
Nominal voltage

100 – 240 VAC

Operating voltage

70 – 265 VAC

Standby consumption

<1 W

Mains connector

IEC inlet

Dimensions
Dimensions

W: 483 mm (19”), H: 44 mm (1 U), D: 276 mm (10.9”)

Weight
Weight

4.2 kg (9.3 lbs)

Finish
Finish

Dark grey aluminum front and black steel chassis

Approvals
Approvals

CE, RoHS, WEEE, UL (UL 60065), CSA C22.2 NO. 60065, FCC Part 15 Subpart B Class A, PSE, CCC Energy Star

Shipping Policy

VMT offers free insured shipping to almost all Pin Codes in the country. We use the standard shipping mode and operate via our logistics partners who are amongst the best in the country for product shipping. 

7 Day Easy-Refund Policy

Receive a refund for any reason if you return a product within 7 days of your delivery date that is still in brand new condition with the original packaging and with all items delivered with the product.

Missing/Damaged Fee

For products returned with the following conditions below, a 15% product missing/damaged fee will be deducted from the refunded amount.

  • Wear and tear on the product like small scratches and dents
  • Missing box items like an owner’s manual or software/ driver CD’s, etc.
  • Damage or dents incurred during the return shipping process
  • Tampered / Missing barcode from the product

Refunds will not be processed for products with more significant damage or missing significant accessories, like connector cables, or DC power supplies.

Return Policy Exceptions

  • Products received with physical damage must be reported to VMT within 2 days of the delivery date.
  • Products received with missing accessories should be reported within 5 days of the delivery date. Claims made post this period will not be honoured.
  • Products purchased as Open Box cannot be returned. All Open Box sales are final. Open Box products have been tested and are guaranteed to be functional. If you have a reason to believe that your open box product is non-functional, please contact us on helpdesk@VMT.com with video evidence. Product malfunction for open-box products is covered by VMT, and they enjoy a 2-year Standard VMT warranty as all other products.( open Box B stock products are covered by a 1 year warranty) 
  • We do not accept returns for the following items:
    • Opened software products.
    • All products with manufacturer seal. Once the seal is opened it cannot be assigned to another user, and hence vmt cannot accept the return unless there is a case of product malfunction.
    • Audio Interfaces, Midi Keyboards or any other product that entails registration in order to be used. Once registered, the product cannot be reassigned, and hence VMT cannot accept the return.
    • Gift Cards and Gift Vouchers


  • Products damaged due to the use of an inappropriate power supply or products that were damaged due to voltage stability issues will not be accepted as returns.
  • Products that show wilful damage will not be accepted as returns. 

Note* - In case VMT is unable to pick-up your shipment due to certain unforeseen circumstance, you may have to ship the products to our facility. The logistic charges involved in these cases would be refunded back to you after the product reaches us.

Return Shipping

VMT shall bear the cost of the return shipping to all Pin Codes that can avail free shipping. In case VMT cannot arrange a pickup, you can send the shipment back by requesting a Free Shipping Coupon (Due to lockdowns and limited service in certain areas) For products that weigh over 30 Kg, the cost of shipping will be borne by the customer.

Return Process

If you would like to return a product, it is required to call us as soon as possible at +91-22-43432222. All returns must be authorised and the return shipment must be mailed within 15 days of receiving the original shipment.

The refund will be initiated only after the package has been received back at our facility. The refunded amount will be transferred, as per banking and payment gateway norms, within 5 to 7 business days of the receipt of the returned shipment.

VMT’s address : Send your return to:

Vardhaman Megatech Pvt. Ltd,

The Online Returns Dept., Vardhaman House, DL Road, Kalachowki, Mumbai 400033