PLD4.5
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
Our Categories
Latest Products

PLD4.5

Available: In Stock
Rs. 139,600.00
Image
  • Order within

Features

  • Flexible Amplifier Summing Technology™ (FAST) drives most any loudspeaker system or configuration by distributing total amplifier power across one, two, three, or all four channels.
  • Four channels of full function onboard loudspeaker DSP with crossover and parametric EQ filters, limiting and alignment delay eliminate the need for outboard loudspeaker processors.
  • E Series Entertainment System DSP Tunings are now available for PLD processing amplifiers:

             - Visit the Amplifier Navigator Software to download and update

  • Powerful Intrinsic Correction™ processing maximizes the sonic performance of QSC loudspeakers.
  • 20 factory preset configurations that can be modified and stored in the 50 user presets.
  • PowerLight universal switch mode power supply with PFC for highest efficiency, improved audio performance, and low weight.
  • Four input XLR connectors and six NL4 output connectors.
  • Integrated front panel with channel Select and Mute buttons, input and output LED metering, 400×240 LCD, intuitive navigation buttons, LED power button and indicator, and cast aluminum handles.
  • Preset Wizard simplifies amplifier configuration, providing selection from a list of the top selling passive loudspeakers.

General Specifications

    PLD4.2 PLD4.3 PLD4.5
Typical Distortion  
0.01–0.06%
Maximum Distortion   1.0%
Frequency response   20 Hz–15 kHz ±0.2 dB
20 Hz–20 kHz +0.2/-0.7 dB
Noise:
Unweighted Output Unmuted
 
-101 dB

Noise:
Weighted Output Muted
  -109 dB
Gain 1.2V 34.0 dB 38.4 dB 38.4 dB
Damping factor   >150
Input impedance   >10 kΩ, balanced or unbalanced 
Maximum rms input level 3.9V
12.28 V (+24 dBu)

1.2V 3.88 V (+14 dBu)
Amplifier and load protection   Short circuit, open circuit, thermal, RF protection. on/off muting, DC fault shutdown, active inrush limiting, input current limiting
AC Power Input   4.2: Universal Power Supply 100-132/200–240 VAC, 50–60 Hz
4.3/4.5: Universal Power Supply 100–240 VAC, 50–60 Hz

Power Specifications

  PLD4.2 PLD4.3 PLD4.5
  Peak  Continuous Peak Continuous Peak Continuous
4 Independent Channels
A, B, C, D
 
500 W 400 W 900 W 625 W 1200 W 1150 W
700 W 400 W 1400 W 625 W 2000 W 1250 W
625 W  325 W 1200 W 625 W 1600 W 625 W
2 Channel BTL Bridged
A+B or C+D
Doubles Voltage
 
1200 W 800 W 2400 W 1250 W 4000 W 2250 W
1500 W 600 W NR* NR* NR* NR*
NR* NR* NR* NR* NR* NR*
2 Channel Parallel
AB or CD
Doubles Current
 
500 W 400 W 1300 W 1150 W 1250 W 1150 W
950 W 800 W 2000 W 1250 W 2400 W 2250 W
1200 W 800 W 2500 W 1250 W 4000 W 2100 W
1 Channel 3CH Parallel
ABC
Triples Current
 
500 W 400 W 1400 W 1150 W 1400 W 1150 W
950 W 800 W 2400 W 2000 W 2500 W 2400 W
1800 W 1200 W 3500 W 2500 W 4500 W 4100 W
1 Channel Bridged/Parallel
AB+CD
Doubles Current and Voltage
 
1600 W 1500 W 3500 W 2500 W 4500 W 4200 W
2500 W 1600 W 5000 W 2500 W 7500 W 4200 W
NR* NR* NR* NR* NR* NR*
1 Channel 4CH Parallel
ABCD
Quadruples Current
 
500 W 400 W 1400 W 1150 W 1600 W 1150 W
1000 W 800 W 3000 W 2500 W 3000 W 2300 W
1700 W 1600 W 5000 W 2500 W 5300 W 4200 W


For complete specifications of power output distribution (single, bridged, parallel channels and all combinations), please refer to the product’s User Manual.
NR* = Not Recommended due to excessive current draw
BOLD = Optimal configuration for the load and channel count

Controls, Indicators and Connections

  PLD4.2 PLD4.3 PLD4.5
Controls and indicators (front) Power  • Channel MUTE Buttons • Channel SELECT buttons • Channel input signal and CLIP LED indicators • Channel output and LIMIT LED meters • HOME, ENTER, EXIT, GAIN navigation buttons • Control knob
Controls and indicators (rear) AC Power Disconnect
 
Input connectors Female XLR
Output connectors NL4

Weights and Dimensions

  PLD4.2 PLD4.3 PLD4.5
Product Dimensions (H×W×D) 89 × 482 × 305 mm
3.5 × 19 × 12 in
89 × 482 × 406 mm
3.5 × 19 × 16 in
89 × 482 × 406 mm
3.5 × 19 × 16 in
Carton Dimensions (H×W×D) 610 × 460 × 178 mm
24 × 18 × 7 in
610 × 530 × 178 mm
4 × 20.9 × 7 in
610 × 530 × 178 mm
24 × 20.9 × 7 in
Net Weight 8.4 kg / 18.5 lb 9.5 kg / 21 lb 10 kg / 22 lb
Shipping Weight 10 kg / 22 lb 11.4 kg / 25 lb 11.8 kg / 26 lb
Agency approvals UL, CE, RoHS/WEEE compliant, FCC Class A (conducted and radiated emissions)
Carton contents Locking IEC cable, Quick Start Guide, USB cable

 

All specifications are subject to change without notice.

Features

  • Flexible Amplifier Summing Technology™ (FAST) drives most any loudspeaker system or configuration by distributing total amplifier power across one, two, three, or all four channels.
  • Four channels of full function onboard loudspeaker DSP with crossover and parametric EQ filters, limiting and alignment delay eliminate the need for outboard loudspeaker processors.
  • E Series Entertainment System DSP Tunings are now available for PLD processing amplifiers:

             - Visit the Amplifier Navigator Software to download and update

  • Powerful Intrinsic Correction™ processing maximizes the sonic performance of QSC loudspeakers.
  • 20 factory preset configurations that can be modified and stored in the 50 user presets.
  • PowerLight universal switch mode power supply with PFC for highest efficiency, improved audio performance, and low weight.
  • Four input XLR connectors and six NL4 output connectors.
  • Integrated front panel with channel Select and Mute buttons, input and output LED metering, 400×240 LCD, intuitive navigation buttons, LED power button and indicator, and cast aluminum handles.
  • Preset Wizard simplifies amplifier configuration, providing selection from a list of the top selling passive loudspeakers.

General Specifications

    PLD4.2 PLD4.3 PLD4.5
Typical Distortion  
0.01–0.06%
Maximum Distortion   1.0%
Frequency response   20 Hz–15 kHz ±0.2 dB
20 Hz–20 kHz +0.2/-0.7 dB
Noise:
Unweighted Output Unmuted
 
-101 dB

Noise:
Weighted Output Muted
  -109 dB
Gain 1.2V 34.0 dB 38.4 dB 38.4 dB
Damping factor   >150
Input impedance   >10 kΩ, balanced or unbalanced 
Maximum rms input level 3.9V
12.28 V (+24 dBu)

1.2V 3.88 V (+14 dBu)
Amplifier and load protection   Short circuit, open circuit, thermal, RF protection. on/off muting, DC fault shutdown, active inrush limiting, input current limiting
AC Power Input   4.2: Universal Power Supply 100-132/200–240 VAC, 50–60 Hz
4.3/4.5: Universal Power Supply 100–240 VAC, 50–60 Hz

Power Specifications

  PLD4.2 PLD4.3 PLD4.5
  Peak  Continuous Peak Continuous Peak Continuous
4 Independent Channels
A, B, C, D
 
500 W 400 W 900 W 625 W 1200 W 1150 W
700 W 400 W 1400 W 625 W 2000 W 1250 W
625 W  325 W 1200 W 625 W 1600 W 625 W
2 Channel BTL Bridged
A+B or C+D
Doubles Voltage
 
1200 W 800 W 2400 W 1250 W 4000 W 2250 W
1500 W 600 W NR* NR* NR* NR*
NR* NR* NR* NR* NR* NR*
2 Channel Parallel
AB or CD
Doubles Current
 
500 W 400 W 1300 W 1150 W 1250 W 1150 W
950 W 800 W 2000 W 1250 W 2400 W 2250 W
1200 W 800 W 2500 W 1250 W 4000 W 2100 W
1 Channel 3CH Parallel
ABC
Triples Current
 
500 W 400 W 1400 W 1150 W 1400 W 1150 W
950 W 800 W 2400 W 2000 W 2500 W 2400 W
1800 W 1200 W 3500 W 2500 W 4500 W 4100 W
1 Channel Bridged/Parallel
AB+CD
Doubles Current and Voltage
 
1600 W 1500 W 3500 W 2500 W 4500 W 4200 W
2500 W 1600 W 5000 W 2500 W 7500 W 4200 W
NR* NR* NR* NR* NR* NR*
1 Channel 4CH Parallel
ABCD
Quadruples Current
 
500 W 400 W 1400 W 1150 W 1600 W 1150 W
1000 W 800 W 3000 W 2500 W 3000 W 2300 W
1700 W 1600 W 5000 W 2500 W 5300 W 4200 W


For complete specifications of power output distribution (single, bridged, parallel channels and all combinations), please refer to the product’s User Manual.
NR* = Not Recommended due to excessive current draw
BOLD = Optimal configuration for the load and channel count

Controls, Indicators and Connections

  PLD4.2 PLD4.3 PLD4.5
Controls and indicators (front) Power  • Channel MUTE Buttons • Channel SELECT buttons • Channel input signal and CLIP LED indicators • Channel output and LIMIT LED meters • HOME, ENTER, EXIT, GAIN navigation buttons • Control knob
Controls and indicators (rear) AC Power Disconnect
 
Input connectors Female XLR
Output connectors NL4

Weights and Dimensions

  PLD4.2 PLD4.3 PLD4.5
Product Dimensions (H×W×D) 89 × 482 × 305 mm
3.5 × 19 × 12 in
89 × 482 × 406 mm
3.5 × 19 × 16 in
89 × 482 × 406 mm
3.5 × 19 × 16 in
Carton Dimensions (H×W×D) 610 × 460 × 178 mm
24 × 18 × 7 in
610 × 530 × 178 mm
4 × 20.9 × 7 in
610 × 530 × 178 mm
24 × 20.9 × 7 in
Net Weight 8.4 kg / 18.5 lb 9.5 kg / 21 lb 10 kg / 22 lb
Shipping Weight 10 kg / 22 lb 11.4 kg / 25 lb 11.8 kg / 26 lb
Agency approvals UL, CE, RoHS/WEEE compliant, FCC Class A (conducted and radiated emissions)
Carton contents Locking IEC cable, Quick Start Guide, USB cable

 

All specifications are subject to change without notice.

Shipping Policy

VMT offers free insured shipping to almost all Pin Codes in the country. We use the standard shipping mode and operate via our logistics partners who are amongst the best in the country for product shipping. 

7 Day Easy-Refund Policy

Receive a refund for any reason if you return a product within 7 days of your delivery date that is still in brand new condition with the original packaging and with all items delivered with the product.

Missing/Damaged Fee

For products returned with the following conditions below, a 15% product missing/damaged fee will be deducted from the refunded amount.

  • Wear and tear on the product like small scratches and dents
  • Missing box items like an owner’s manual or software/ driver CD’s, etc.
  • Damage or dents incurred during the return shipping process
  • Tampered / Missing barcode from the product

Refunds will not be processed for products with more significant damage or missing significant accessories, like connector cables, or DC power supplies.

Return Policy Exceptions

  • Products received with physical damage must be reported to VMT within 2 days of the delivery date.
  • Products received with missing accessories should be reported within 5 days of the delivery date. Claims made post this period will not be honoured.
  • Products purchased as Open Box cannot be returned. All Open Box sales are final. Open Box products have been tested and are guaranteed to be functional. If you have a reason to believe that your open box product is non-functional, please contact us on helpdesk@VMT.com with video evidence. Product malfunction for open-box products is covered by VMT, and they enjoy a 2-year Standard VMT warranty as all other products.( open Box B stock products are covered by a 1 year warranty) 
  • We do not accept returns for the following items:
    • Opened software products.
    • All products with manufacturer seal. Once the seal is opened it cannot be assigned to another user, and hence vmt cannot accept the return unless there is a case of product malfunction.
    • Audio Interfaces, Midi Keyboards or any other product that entails registration in order to be used. Once registered, the product cannot be reassigned, and hence VMT cannot accept the return.
    • Gift Cards and Gift Vouchers


  • Products damaged due to the use of an inappropriate power supply or products that were damaged due to voltage stability issues will not be accepted as returns.
  • Products that show wilful damage will not be accepted as returns. 

Note* - In case VMT is unable to pick-up your shipment due to certain unforeseen circumstance, you may have to ship the products to our facility. The logistic charges involved in these cases would be refunded back to you after the product reaches us.

Return Shipping

VMT shall bear the cost of the return shipping to all Pin Codes that can avail free shipping. In case VMT cannot arrange a pickup, you can send the shipment back by requesting a Free Shipping Coupon (Due to lockdowns and limited service in certain areas) For products that weigh over 30 Kg, the cost of shipping will be borne by the customer.

Return Process

If you would like to return a product, it is required to call us as soon as possible at +91-22-43432222. All returns must be authorised and the return shipment must be mailed within 15 days of receiving the original shipment.

The refund will be initiated only after the package has been received back at our facility. The refunded amount will be transferred, as per banking and payment gateway norms, within 5 to 7 business days of the receipt of the returned shipment.

VMT’s address : Send your return to:

Vardhaman Megatech Pvt. Ltd,

The Online Returns Dept., Vardhaman House, DL Road, Kalachowki, Mumbai 400033