PLM 20000Q
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
Our Categories
Latest Products

PLM 20000Q

Available: In Stock
Rs. 480,000.00
Image
  • Order within

Specification

General
Number of input channels 2
Number of output channels 4
Peak total output all channels driven 20000 W
Peak output voltage per channel 194 V
Max output current per channel 67 A peak
Max output power (all channels driven)
16 ohms 1150 W
8 ohms 2300 W
4 ohms 4400 W 1
2 ohms 4800 W 1
All channels driven into optimal impedance interval > 5000 W into 2.2 - 3.3 ohms
Max output power bridged
8 ohms 8800 W
4 ohms 9600 W
Bridged into optimal impedance interval > 10000 W into 4.4 – 6.6 ohms
Device presets
Local memory locations for the settings of the product 100
Performance
THD + N 20 Hz - 20 kHz for 1 W < 0.05 %
THD + N at 1 kHz and 1 dB below clipping < 0.04 %
Dynamic range with digital inputs (for all supported sample rates) >114 dB
Dynamic range with analog inputs >110 dB
Frequency response (1 W into 8 Ohm, 20 Hz - 20 kHz) +/- 0.05 dB
Common Mode Rejection (CMR) >74 dB, 20 Hz to 20 kHz
Internal Sample Rate / Data path 96 kHz / 32 bit floating point
Product propagation delay (straight path analog server input -> amp) 1.61 ms
Product propagation delay AES 96 kHz / analog input 1.68 ms
Sample Rate Converters
THD + Noise 0.00003 %, 20 Hz - 20 kHz, unweighted
Analog to Digital inputs
Inputs 2 inputs x 2 link
Input sensitivity settings +12 or +26 dBu
THD + Noise 0.00022 %, typical at 1 kHz unweighted at +26 dBu headroom setting
THD + Noise 0.00033 %, typical at 20 Hz and 20 kHz unweighted at +26 dBu headroom setting
Gain, Sensitivity and Limiters
Adjustable Inter-Sample Voltage Peak Limiter (ISVPL) 17.8 - 194 V, step size 0.1 V
Current Peak Limiter < 300 ms 67 A peak
Current Average Limiter (CAL) > 300 ms 33 Arms
MaxRMS (rms voltage limiter) Yes
MaxPeak (peak voltage limiter) Yes
Output attenuator -Inf to 0 dB, step size 0.25 dB
AES3/EBU (sample rate converters available as desired)
Support redundant paths Yes
Flexible topology yes
Supported sample rates 48, 96 kHz
Back panel Interface
AES / EBU / I/O (input + link) 2 x 3-pin XLR
Analog, 2-channel I/O (input + link) 4 x 3-pin XLR, electronically balanced
Output connectors Neutrik speakON (1 x NLT8, 2 x NLT4) or 4 Binding Posts (pairs)
Auto 10/100, Auto Uplink 2 x RJ45 etherCON
Control and monitoring interface Via Ethernet for Lake Controller software, or DLM (the 3rd party protocol)
Detachable mains cord Neutrik PowerCon rated at 250V/32A
Cooling Three fans, front-rear airflow, temperature controlled speed
Front-panel user interface
Display 2.5 inch, daylight readable LCD
Fault/Warning/Limit/Clip indicators RGB LEDs and detailed fault description on display
Mute and soft function buttons 8 provided
Standby Power button On/Standby
Meter button Toggles through meter views
Menu Provides a menu driven interface for full function front panel control
Rotary Encoder Yes
Exit Button Provides a “back” function
Power
Operating voltage 70-265 V AC
Soft start / Inrush power Yes/ Max 8 A
Power Average Limiter (PAL) Yes
Power Factor Correction (PFC) Yes
Breaker Emulation Limiter (BEL) Yes, selectable breaker profile
Under Voltage Limiter (UVL) Yes
Dimensions
Rack rail to rear panel W: 483 mm (19"), H: 88 mm (2 U), D: 424 mm (16")
Weight
Weight 17 kg (37 lbs)
Finish
Finish Black painted steel chassis with black painted steel / aluminum front
Approvals
Approvals CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC
1: Asymmetrical loading of the outputs will yield even higher ratings. If one (or two) channel(s) has reduced power requirements, then the voltage drop from the power supply will be reduced, resulting in higher power availability for the other channel(s).

Specification

General
Number of input channels 2
Number of output channels 4
Peak total output all channels driven 20000 W
Peak output voltage per channel 194 V
Max output current per channel 67 A peak
Max output power (all channels driven)
16 ohms 1150 W
8 ohms 2300 W
4 ohms 4400 W 1
2 ohms 4800 W 1
All channels driven into optimal impedance interval > 5000 W into 2.2 - 3.3 ohms
Max output power bridged
8 ohms 8800 W
4 ohms 9600 W
Bridged into optimal impedance interval > 10000 W into 4.4 – 6.6 ohms
Device presets
Local memory locations for the settings of the product 100
Performance
THD + N 20 Hz - 20 kHz for 1 W < 0.05 %
THD + N at 1 kHz and 1 dB below clipping < 0.04 %
Dynamic range with digital inputs (for all supported sample rates) >114 dB
Dynamic range with analog inputs >110 dB
Frequency response (1 W into 8 Ohm, 20 Hz - 20 kHz) +/- 0.05 dB
Common Mode Rejection (CMR) >74 dB, 20 Hz to 20 kHz
Internal Sample Rate / Data path 96 kHz / 32 bit floating point
Product propagation delay (straight path analog server input -> amp) 1.61 ms
Product propagation delay AES 96 kHz / analog input 1.68 ms
Sample Rate Converters
THD + Noise 0.00003 %, 20 Hz - 20 kHz, unweighted
Analog to Digital inputs
Inputs 2 inputs x 2 link
Input sensitivity settings +12 or +26 dBu
THD + Noise 0.00022 %, typical at 1 kHz unweighted at +26 dBu headroom setting
THD + Noise 0.00033 %, typical at 20 Hz and 20 kHz unweighted at +26 dBu headroom setting
Gain, Sensitivity and Limiters
Adjustable Inter-Sample Voltage Peak Limiter (ISVPL) 17.8 - 194 V, step size 0.1 V
Current Peak Limiter < 300 ms 67 A peak
Current Average Limiter (CAL) > 300 ms 33 Arms
MaxRMS (rms voltage limiter) Yes
MaxPeak (peak voltage limiter) Yes
Output attenuator -Inf to 0 dB, step size 0.25 dB
AES3/EBU (sample rate converters available as desired)
Support redundant paths Yes
Flexible topology yes
Supported sample rates 48, 96 kHz
Back panel Interface
AES / EBU / I/O (input + link) 2 x 3-pin XLR
Analog, 2-channel I/O (input + link) 4 x 3-pin XLR, electronically balanced
Output connectors Neutrik speakON (1 x NLT8, 2 x NLT4) or 4 Binding Posts (pairs)
Auto 10/100, Auto Uplink 2 x RJ45 etherCON
Control and monitoring interface Via Ethernet for Lake Controller software, or DLM (the 3rd party protocol)
Detachable mains cord Neutrik PowerCon rated at 250V/32A
Cooling Three fans, front-rear airflow, temperature controlled speed
Front-panel user interface
Display 2.5 inch, daylight readable LCD
Fault/Warning/Limit/Clip indicators RGB LEDs and detailed fault description on display
Mute and soft function buttons 8 provided
Standby Power button On/Standby
Meter button Toggles through meter views
Menu Provides a menu driven interface for full function front panel control
Rotary Encoder Yes
Exit Button Provides a “back” function
Power
Operating voltage 70-265 V AC
Soft start / Inrush power Yes/ Max 8 A
Power Average Limiter (PAL) Yes
Power Factor Correction (PFC) Yes
Breaker Emulation Limiter (BEL) Yes, selectable breaker profile
Under Voltage Limiter (UVL) Yes
Dimensions
Rack rail to rear panel W: 483 mm (19"), H: 88 mm (2 U), D: 424 mm (16")
Weight
Weight 17 kg (37 lbs)
Finish
Finish Black painted steel chassis with black painted steel / aluminum front
Approvals
Approvals CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC
1: Asymmetrical loading of the outputs will yield even higher ratings. If one (or two) channel(s) has reduced power requirements, then the voltage drop from the power supply will be reduced, resulting in higher power availability for the other channel(s).

Shipping Policy

VMT offers free insured shipping to almost all Pin Codes in the country. We use the standard shipping mode and operate via our logistics partners who are amongst the best in the country for product shipping. 

7 Day Easy-Refund Policy

Receive a refund for any reason if you return a product within 7 days of your delivery date that is still in brand new condition with the original packaging and with all items delivered with the product.

Missing/Damaged Fee

For products returned with the following conditions below, a 15% product missing/damaged fee will be deducted from the refunded amount.

  • Wear and tear on the product like small scratches and dents
  • Missing box items like an owner’s manual or software/ driver CD’s, etc.
  • Damage or dents incurred during the return shipping process
  • Tampered / Missing barcode from the product

Refunds will not be processed for products with more significant damage or missing significant accessories, like connector cables, or DC power supplies.

Return Policy Exceptions

  • Products received with physical damage must be reported to VMT within 2 days of the delivery date.
  • Products received with missing accessories should be reported within 5 days of the delivery date. Claims made post this period will not be honoured.
  • Products purchased as Open Box cannot be returned. All Open Box sales are final. Open Box products have been tested and are guaranteed to be functional. If you have a reason to believe that your open box product is non-functional, please contact us on helpdesk@VMT.com with video evidence. Product malfunction for open-box products is covered by VMT, and they enjoy a 2-year Standard VMT warranty as all other products.( open Box B stock products are covered by a 1 year warranty) 
  • We do not accept returns for the following items:
    • Opened software products.
    • All products with manufacturer seal. Once the seal is opened it cannot be assigned to another user, and hence vmt cannot accept the return unless there is a case of product malfunction.
    • Audio Interfaces, Midi Keyboards or any other product that entails registration in order to be used. Once registered, the product cannot be reassigned, and hence VMT cannot accept the return.
    • Gift Cards and Gift Vouchers


  • Products damaged due to the use of an inappropriate power supply or products that were damaged due to voltage stability issues will not be accepted as returns.
  • Products that show wilful damage will not be accepted as returns. 

Note* - In case VMT is unable to pick-up your shipment due to certain unforeseen circumstance, you may have to ship the products to our facility. The logistic charges involved in these cases would be refunded back to you after the product reaches us.

Return Shipping

VMT shall bear the cost of the return shipping to all Pin Codes that can avail free shipping. In case VMT cannot arrange a pickup, you can send the shipment back by requesting a Free Shipping Coupon (Due to lockdowns and limited service in certain areas) For products that weigh over 30 Kg, the cost of shipping will be borne by the customer.

Return Process

If you would like to return a product, it is required to call us as soon as possible at +91-22-43432222. All returns must be authorised and the return shipment must be mailed within 15 days of receiving the original shipment.

The refund will be initiated only after the package has been received back at our facility. The refunded amount will be transferred, as per banking and payment gateway norms, within 5 to 7 business days of the receipt of the returned shipment.

VMT’s address : Send your return to:

Vardhaman Megatech Pvt. Ltd,

The Online Returns Dept., Vardhaman House, DL Road, Kalachowki, Mumbai 400033