Faital Pro 5FE125

Speaker Spares
5FE125

Description

Faital Pro 5FE125 is a 5 inch cone driver with a 32 mm voice coil and a ferrite magnet. The listing gives 80 W AES power and 88 dB sensitivity on 8 ohm, covering 63 Hz to 6.3 kHz. The net weight is 1.1 kg. Useful for PA and monitor builds that need the listed bandwidth. Available from VMT with a GST invoice, shipped across India.

Key features

  • 5" cone driver with Ferrite magnet
  • Voice coil 32 mm (1.26")
  • 80 W AES power on 8 ohm
  • Sensitivity 88 dB (1 W / 1 m)
  • Frequency range 63 Hz - 6.3 kHz
  • Net weight 1.1 kg

Specifications

Woofer5"
Power (RMS)80 W
Frequency range63 Hz - 6.3 kHz
Impedance8 ohm
Weight1.1 kg
Manufacturer description
Nominal Specifications
Nominal Diameter 130 mm (5 in)
Overall Diameter 146.4 mm (5.8 in)
Bolt Circle Diameter 133 mm (5.24 in)
Baffle Cutout Diameter 114 mm (4.49 in)
Depth 72.8 mm (2.86 in)
Flange and Gasket Thickness 7.8 mm (0.30 in)
Net Weight 1.1 kg (2.5 lb)
Shipping Box
(Single Carton Box - 8 units)
302 x 275 x 186 mm
(11.9 x 10.8 x 7.3 in)
Shipping Weight (8 units) 9.6 kg (21.2 lb)


Technical Parameters
Nominal Impedance 8 Ohm
Minimum Impedance 6.2 Ohm
AES Power Handling (1) 80 W
Maximum Power Handling (2) 160 W
Sensitivity (1W/1m) 88 dB
Frequency Range 63÷6300 Hz
Voice Coil Diameter 32 mm (1.26 in)
Winding Material Cu
Former Material Kapton
Winding Depth 12.5 mm (0.49 in)
Magnetic Gap Depth 6 mm (0.24 in)
Flux Density 1 T
Magnet Ferrite Ring
Basket Material Steel
Demodulation Aluminum Ring
Cone Surround (3) Half Roll
NET Air Volume filled by Loudspeaker 0.3 dm^3 (0.011 ft^3)
Spider Profile 1x constant height waves
Thiele and small parameters
Fs 65 Hz
Re 5.4 Ohm
Qes 0.51
Qms 7.4
Qts 0.48
Vas 5.4 dm^3 (0.19 ft^3)
Sd 84 cm^2 (13.07 in^2)
Xmax (4) 5.25 mm
Xdamage (5) 9.5 mm
Mms 11.0 g
Bl 6.9 N/A
Le 0.41 mH
Mmd 10.1 g
Cms 0.55 mm/N
Rms 0.6 kg/s
Eta Zero 0.28 %
EBP 127 Hz


PART NUMBER (P/N)
Faston Terminals - 8 Ohm Version 01304363



Notes:
(1) 2 Hours Test According to AES 2-1984 Rev. 2003
(2) Maximum power is defined as 3dB greater than nominal power.
(3) NBR (Rubber)
(4) Xmax= [(winding depth - magnetic gap depth)/2] + (magnetic gap depth/3)
(5) Maximum excursion before permanent damage

Customers also viewed