AUDAC CAP224
Install Amplifier
Description
Audac CAP224 is a two channel 100V installation amplifier delivering 240 W per channel, built for two independent zones in commercial audio systems. It uses Class D amplification with a switch mode supply, a 400 Hz high-pass switch per channel and a 2U rack chassis. Buy it at VMT with a GST invoice and delivery across India.
Key features
- 2 channels, 240 W per channel on 100V lines
- Class D amplification with switch mode power supply
- Balanced XLR inputs with link through outputs
- 400 Hz high-pass switch and gain control per channel
- Protection against DC, short circuit, overheating and overload
- 2U 19" rack housing, 7.2 kg
Specifications
| Amp type | Install 100V amp |
|---|
| Channels | 2 |
|---|
| Total power | 480 W |
|---|
| Amp class | Class D |
|---|
| Connectors | XLR inputs with link outputs, Euro terminal block 100V outputs |
|---|
| 100V/70V output | Yes |
|---|
| Rack size | 2U |
|---|
| Weight | 7.2 kg |
|---|
Manufacturer description
The CAP series are professional 100V multi-channel power amplifiers. The CAP224 offers two channels and has an output power of 240 Watt. This way, a flexible solution is created for multi-zone audio distribution systems with two independent zones. They are designed as no-nonsense amplifiers with only the necessary controls and connections which creates great simplicity in use and installation. A high efficiency and reliability of the device is achieved by using switching power supplies in combination with Class-D amplifier technology. A temperature controlled fan constantly keeps all parts within the right operation range while avoiding excessive buzz. A built-in multipurpose protection circuit protects against DC malfunction, short circuit, overheating, overload and limits the signal when necessary. The input connections are performed using balanced XLR connectors and link output connectors are provided for link through to other amplifiers. Besides, a high-pass filter switch (400 Hz) and a gain adjustment potentiometer are provided for each channel. The output connections are performed using reliable terminal block connectors and this all is housed into a solid constructed, double rack space (2 HE) 19” rack mounting housing.
| SYSTEM SPECIFICATIONS |
| RMS Power |
2 x 240 W |
| Signal / Noise |
> 100 dB |
| THD+N (@ 1 kHz) |
< 0.3% (1/2 Rated Power) |
| Crosstalk (@ 1 kHz) |
< 80 dB |
| Technology |
Class-D |
| Common mode rejection ratio |
70 dB |
| Protection |
DC Short circuit |
|
Over heating |
|
Over load |
|
Signal limiting |
| Cooling |
Temperature controlled FAN |
| Operating temperature |
0° ~ 40° @ 95% Humidity |
| Frequency |
Response (± 3 dB) |
50 Hz - 22 kHz |
| Power |
Supply |
Switching mode |
|
Source |
230 ~ 240 V AC / 50 Hz |
| Inputs |
Sensitivity (1W/1m) |
-0.5 dB ~ 10.5 dB |
|
Impedance |
10 kΩ balanced |
|
Connector |
XLR female with Male Linkthrough |
| Outputs |
Voltage / Impedance |
100 V / 42 Ω |
|
Connector |
4-pin Euro Terminal Block (Pitch - 5.08 mm) |
| PRODUCT FEATURES |
| Dimensions |
482 x 88 x 420 mm (W x H x D) |
| Weight |
7.200 kg |
| Mounting |
19” |
| Unit height |
2 HE |
| Construction |
Steel |
| Colours |
Black |
| Accessories |
Included |
2 x 4-pin Euro Terminal Block outputs connector |
|
Optional |
CPE100 Rack mount handles |