LAB GRUPPEN E 8:2

Description
Lab Gruppen E 8:2 is a two channel Class D installation amplifier in a 1U chassis, delivering 400 W per channel into 2 or 4 ohm, into 8 ohm in 70V mode, or into 70V lines, and it can also drive 100V loads. IntelliDrive sets each channel to low impedance or constant voltage. Auto standby keeps idle draw below 1 W. Buy it at VMT with a GST invoice and delivery across India.
Key features
- 2 x 400 W into 2 or 4 ohm, or 8 ohm in 70V mode, 800 W total
- Lo-Z or 70V mode per channel, 100V loads supported
- Rail Sense Limiter and switchable 50 Hz high pass per channel
- Auto standby below 1 W, Energy Star certified
- Screw terminal inputs and outputs, GPIO, 1U chassis
Specifications
| Amp type | Install 100V amp |
|---|---|
| Channels | 2 |
| Power per channel, 8 ohm | 400 W |
| Power per channel, 4 ohm | 400 W |
| Power per channel, 2 ohm | 400 W |
| Total power | 800 W |
| Amp class | Class D |
| Connectors | Detachable screw terminal inputs and outputs, GPIO |
| 100V/70V output | Yes |
| Rack size | 1U |
Manufacturer description
Product Features
-
800 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
-
Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
-
Flexible IntelliDrive permits delivering the 2 x 400 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
-
Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
-
High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
-
IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
-
Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
-
Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
-
Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
-
Built in 50 Hz high pass filter selectable per channel available on rear panel switch
-
Per-channel attenuation knob and signal LED on rear panel for simple commissioning
-
Efficient cooling with temperature-controlled fan with front to back airflow
-
Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
-
GPIO connector with power control and indication for further system integration
-
Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
Specification
General
| Number of amplifier channels |
2 |
| Max total output all channels driven |
800 W |
| Peak output voltage per channel |
100 V / 70 Vrms |
| Max. output current |
16 Arms |
Max output power (all channels driven)
| 2 ohms |
400 W |
| 4 ohms |
400 W |
| 8 ohms |
400 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 200 W) |
| 16 ohms |
290 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 100 W) |
| 70 V |
400 W |
| 100 V |
Can deliver 400 W to a 100 V load tapped at 800 W |
Performance
| THD 20 Hz - 20 kHz at 1 W |
<0.1% |
| THD at 1 kHz and 1 dB below clipping |
<0.05% |
| Signal to Noise Ratio |
>112 dBA |
| Channel separation (Crosstalk) at 1 kHz |
>70 dB |
| Frequency Response |
2 Hz - 40 kHz |
| Input impedance |
20 kOhm |
| Common Mode Rejection (CMR) |
50 dB |
| Output impedance |
25 mOhm |
Gain, Sensitivity and Limiters
| Limit and gain switch defining limit and gain (per channel) |
2 pos: Lo-Z and 70 V |
| VPL for 70 V mode |
100 V |
| VPL for Lo-Z mode |
56.6 V |
| Sensitivity for stated power into 4 Ohm in Lo-Z mode |
4 dBu |
| Sensitivity for 70.7 V out in 70 V mode |
4 dBu |
| Sensitivity for stated power into 2 Ohm in Lo-Z mode |
1 dBu |
| Sensitivity for stated power into 8 Ohm in 70 V mode |
2.1 dBu |
| Sensitivity for stated power into 16 Ohm in 70 V mode |
3.7 dBu |
| Gain in 70 V mode |
35.2 dB |
| Gain in Lo-Z mode |
30.3 dB |
| Level adjustment (per channel) |
Rear panel potentiometer, from -inf to 0 dB |
Connectors and Buttons
| Input connectors (per ch.) |
3 - pin detachable screw terminals, electronically balanced |
| Output connectors (per ch.) |
2 - pin detachable screw terminals |
| High pass filter |
Fixed at 50 Hz, switchable per channel |
| Power control |
Can be used to go between standby and ON |
| GPI (power control input) |
Contact closure type, 2-pin detachable screw terminal, controls the power state |
| GPO (power state output) |
Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state |
| Cooling |
Single fan, front to rear airflow, no filter required, temperature controlled speed |
Power
| Nominal voltage |
100 – 240 VAC |
| Operating voltage |
70 – 265 VAC |
| Standby consumption |
<1 W |
| Mains connector |
IEC inlet |
Dimensions
| Dimensions |
W: 483 mm (19”), H: 44 mm (1 U), D: 276 mm (10.9”) |
Weight
| Weight |
4.2 kg (9.3 lbs) |
Finish
| Finish |
Dark grey aluminum front and black steel chassis |
Approvals
| Approvals |
CE, RoHS, WEEE, UL (UL 60065), CSA C22.2 NO. 60065, FCC Part 15 Subpart B Class A, PSE, CCC Energy Star |





