BSS AUDIO AR 133

DI Boxes · Item no. 1F 02 X001450
AR 133

Description

BSS Audio AR133 is an active direct box that matches the level and impedance of guitars, keyboards and speaker feeds to a balanced mixer input. It has three input pad settings, a transformer balanced XLR output and a parallel link jack. It runs from console phantom power or a 9 volt battery. VMT supplies it with a GST invoice and shipping across India.

Key features

  • Input pad: 0 dB, minus 20 dB or minus 40 dB
  • Phantom powered with automatic switch to battery
  • Transformer balanced XLR output
  • Parallel 1/4" jack outputs and parallel XLR input
  • THD below 0.005% at 1 kHz
  • Weight 650 g without battery

Specifications

Processor typeDI box
Connectors1/4" jack and XLR in, XLR out
Built-in DSPNo
Needs phantom powerYes
Inputs and outputs2 x 1/4" jack + 1 XLR in (parallel), 1 XLR out
Weight0.65 kg
Manufacturer description

FEATURES

  • Switchable input

  • attenuation

  • 0dB for guitar-type

  • pickups

  • -20dB for line level

  • signals

  • -40dB for speaker

  • feeds

  • Matches the level and impedance

  • with unity gain without

  • loading the source

  • Can drive signals up long cable

  • lengths

  • Powered from console

  • phantom power or internal

  • battery

  • Automatic switchover to battery

  • if phantom power fails

  • Parallel Link Jack output to feed

  • amplifiers directly

  • Parallel XLR input for

SPECIFICATIONS

  • Input Section

  • Input Impedance

  • 1MOhm (pad at 0dB)

  • 47kOhm (pad at -20dB)

  • 47kOhm (pad at -40dB)

  • Max Input Level

  • +9dBu (pad at 0dB)

  • +29dBu (pad at -20dB)

  • +49dBu (pad at -40dB)

  • Connectors

  • Two Parallel 1/4" jack connectors and a parallel XLR connector (unbalanced)

  • Jack:

  • Tip Hot (+ve)

  • Sleeve Ground

  • XLR:

  • Pin 2 Hot (+ve)

  • Pin 1 & 3 Ground

  • Output Section

  • Output: Transformer Balanced

  • Max. Output Level: +8dBu into 600 ohms or greater

  • Connector: XLR3-32 or equivalent

  • System Performance

  • Distortion (THD): < 0.005% at 1kHz, 0dBu output

  • Noise: < -105dB unweighted, 22hz-22khz, rms*

  • Frequency Response: 30Hz to 20kHz, +0dB/-1dB

  • General

  • Main/Standby battery: 9 volt PP3 type, preferably alkaline.

  • Current drain: on phantom - less than 7.5mA, on battery - less than 2mA

  • Phantom Power: +20 volts DC to +48 volts DC

  • Weight: 650 gms, excluding batteries.

  • Overall Dimensions: 59 mm x 124 mm x 143 mm (2.3" x 4.9" x 5.6")

Customers also viewed