RADIAL J 48
DI Boxes · Item no. DI BOX

Description
Radial J48 is an active direct box for guitars, basses and keyboards, built in a 14-gauge steel case. It converts a high impedance instrument signal into a balanced XLR output and adds a 15 dB pad, an 80 Hz low-cut filter, a polarity switch, ground lift and a merge function. VMT supplies it with a GST invoice and shipping across India.
Key features
- Active DI, powered by 48V phantom
- 1/4" input and thru, balanced XLR output
- 15 dB pad, 80 Hz low-cut filter and polarity reverse
- Ground lift and merge function
- 14-gauge steel construction, about 0.7 kg
Specifications
| Processor type | DI box |
|---|---|
| Connectors | 1/4" in, 1/4" thru, XLR out |
| Built-in DSP | No |
| Needs phantom power | Yes |
| Inputs and outputs | 1 in / 1 thru + 1 XLR out |
| Weight | 0.7 kg |
Manufacturer description
Radial J48 Features:
- Welded I-beam construction makes it impossible to torque the PC board. This virtually eliminates cold solder joints - the No.1 cause of system failure in the field.
- An innovative 'slide-in-place' XLR trace makes it possible to use I-Beam girder construction.
- A digital switching power supply steps-up the internal rail voltage to 9-Volts. The J48 will not choke like other DI's when hit with large transients.
- A military-grade PC board is employed for maximum wear and tear in abusive environments. Welded steel standoffs ensure the PC board will not shift.
- A -15dB pad allows super hot inputs such as that from a CD player to be connected and balanced for long runs.
- Momentary 48V Check LED will flash once when the 80Hz filter is depressed to tell you phantom power is present.
- The Merge function turns the input & thru into 'left & right' inputs to mono mix at the XLR output. This handy function saves valuable inputs on the mixer!
- The input is connected to the instrument.
- The thru-put is connected to the instrument amplifier. The J48 has a high input impedance to reduce loading.
- Our book-end design creates a protective zone around the switches & connectors for best protection!
- A heavy-duty baked enamel finish for excellent durability and great looks for years! 100% 14-gauge steel construction.
- The 600 Ohm balanced XLR out is mic level to properly match concert splitters - will drive 1000 feet without appreciable noise.
- A polarity reverse switch flips the polarity from the AES standard Pin-2 to Pin-3 on the XLR and is used when combining sounds that may be out of phase.
- An 80Hz low-cut (highpass) filter gently reduces excessive bass for more headroom and clarity. Eliminates run-away resonant feedback from acoustics!
- The ground-lift disconnects the ground path to the transformer at the XLR output. This is used when a ground path is made at the input side such as with a keyboard.
- A no-slip full bottom pad reduces mechanical vibration, improves electrical isolation and keeps the J48 from moving around on busy stages!
-
Tech Specs
Type: Active DI
Channels: 1
Inputs: 1 x 1/4"
Outputs: 1 x XLR, 1 x 1/4" thru
Height:2"
Depth: 5"
Width: 3.3"
Weight:1.55 lbs.





