GX5
- Product SKU: 1B 01 X000059
- Category: ., Amplifier, Fees products, Products, Switch Mode Amplifier
- Order within
Features
- Power levels matched to the most popular speakers used by entertainers
- Optimized for maximum real-world headroom into 4 ohm and 8 ohm speaker systems
- Inputs: XLR, 1/4-inch TRS and phono input connectors for compatibility with any source
- Outputs: Speakon® combo accepts, 1/4-inch (TS) plugs or Speakon 2-pole and 4-pole plugs (connects two poles only). Binding posts support all other speaker wiring systems
- Minimum depth chassis (10.1-inch / 257 mm) fits in compact, inexpensive effects racks
- Lightweight - GX3 and GX5 less than 26 lb (12.5 kg). GX7 only 15.5 lb (7 kg)*
- Detented gain controls for precise setting and matching of sensitivity
- GuardRail™ automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show
- Front panel LEDs monitor power, signal and clipping
- Subwoofer/satellite crossover built-in
* 230V 16.5 lb (7.5 kg)
SPECIFICATIONS | GX3 | GX5 | GX7 | |||
Output power per channel | ||||||
8 ohms / 1 kHz (both channels driven) | 300 W | 500 W | 725 W | |||
8 ohms / 1 kHz (single channel driven) | 350 W | 600 W | 800 W | |||
4 ohms / 1 kHz (both channels driven) | 425 W | 700 W | 1000 W | |||
4 ohms / 1 kHz (single channel driven) | 500 W | 850 W | 1200 W | |||
Distortion (1 dB below rated power, 1 kHz) | 8 ohms: less than 0.02% 4 ohms: less than 0.05% |
|||||
Signal to Noise (20 Hz - 20 kHz) | 100 dB | |||||
Input Sensitivity | 1.2 V rms | |||||
Voltage Gain | 32.2 dB | 34.4 dB | 36.1 dB | |||
Output Circuitry | Class B | 2-tier Class H | 2-tier Class H | |||
Power Requirements (1/8 power, pink noise at 4 ohms, 120V) | 6.3 A | 6 A | 10.1 A | |||
Frequency Response | 20 Hz–20 kHz, +0, -1 dB | |||||
Dynamic Headroom (4 ohms) | 2 dB | |||||
Input Impedance | Greater than 20 kΩ (balanced) | |||||
Maximum Input Level | +24 dBu (16 V rms) | |||||
Input Connectors (each channel) | 3-pin XLR and 1/4-inch TRS, balanced, parallel Phono, unbalanced |
|||||
Output Connectors (each channel) | Speakon®, 1/4-inch, Binding posts | |||||
Amplifier and Load Protection | Short circuit, open circuit, thermal, RF protection Load protected against DC faults |
|||||
Front Panel Controls and Indicators | Gain controls, 21 detents Red CLIP LEDs, proportional, 0.1% THD threshold Green SIGNAL LEDs, threshold 35 dB below clipping Blue POWER LED, AC on |
|||||
Rear Panel Controls | Full Range / Crossover switch 100 Hz, 3rd order LP (sub), 2nd order HP (top) |
|||||
Product Dimensions (H×W×D) | 89 × 483 × 257 mm 3.5 × 19 × 10.1 in |
|||||
Carton Dimensions (H×W×D) | 610 × 380 × 153 mm 24 × 15 × 6 in |
|||||
Net Weight | 12.1 kg / 27 lb | 12.6 kg / 28 lb | 120V model: 7 kg / 15.5 lb 230V model: 7.5 kg / 16.5 lb |
|||
Shipping Weight | 13.2 kg / 29.1 lb | 14.5 kg / 32 lb | 120V model: 9.3 kg / 20.5 lb 230V model: 9.75 kg / 21.5 lb |
|||
Agency Approvals | UL, CE, RoHS/WEEE Compliant | |||||
AC Current and Heating, 120 VAC (multiply current by 0.5 for 230 VAC) |
GX3 | GX5 | GX7 | |||
Operating Condition | AC amps | BTU/hour | AC amps | BTU/hour | AC amps | BTU/hour |
Idle | 0.2 | 44 | 0.3 | 60 | 0.6 | 82 |
8 + 8 ohms, 1/8 power 1 | 4.1 | 904 | 3.3 | 734 | 6.7 | 1169 |
8 + 8 ohms, 1/3 power 2 | 6.1 | 1160 | 8.5 | 1456 | 13.3 | 1807 |
8 + 8 ohms, full power 3 | 9.75 | 1109 | 16.2 | 1891 | 26.5 | 2167 |
4 + 4 ohms, 1/8 power 1 | 6.3 | 1515 | 5.8 | 1160 | 10.1 | 1963 |
4 + 4 ohms, 1/3 power 2 | 9.4 | 2105 | 11.2 | 2162 | 18.5 | 2612 |
4 + 4 ohms, full power 3 | 15.0 | 2297 | 24.5 | 3754 | 40 | 4478 |
1 1/8 power represents typical maximum operating conditions
2 1/3 power represents over-driven program levels
3 Full power is breaker limited to short periods
For 230 V, multiply AC current by 0.5
For 100 V, multiply AC current by 1.25
All specifications are subject to change without notice.
Features
- Power levels matched to the most popular speakers used by entertainers
- Optimized for maximum real-world headroom into 4 ohm and 8 ohm speaker systems
- Inputs: XLR, 1/4-inch TRS and phono input connectors for compatibility with any source
- Outputs: Speakon® combo accepts, 1/4-inch (TS) plugs or Speakon 2-pole and 4-pole plugs (connects two poles only). Binding posts support all other speaker wiring systems
- Minimum depth chassis (10.1-inch / 257 mm) fits in compact, inexpensive effects racks
- Lightweight - GX3 and GX5 less than 26 lb (12.5 kg). GX7 only 15.5 lb (7 kg)*
- Detented gain controls for precise setting and matching of sensitivity
- GuardRail™ automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show
- Front panel LEDs monitor power, signal and clipping
- Subwoofer/satellite crossover built-in
* 230V 16.5 lb (7.5 kg)
SPECIFICATIONS | GX3 | GX5 | GX7 | |||
Output power per channel | ||||||
8 ohms / 1 kHz (both channels driven) | 300 W | 500 W | 725 W | |||
8 ohms / 1 kHz (single channel driven) | 350 W | 600 W | 800 W | |||
4 ohms / 1 kHz (both channels driven) | 425 W | 700 W | 1000 W | |||
4 ohms / 1 kHz (single channel driven) | 500 W | 850 W | 1200 W | |||
Distortion (1 dB below rated power, 1 kHz) | 8 ohms: less than 0.02% 4 ohms: less than 0.05% |
|||||
Signal to Noise (20 Hz - 20 kHz) | 100 dB | |||||
Input Sensitivity | 1.2 V rms | |||||
Voltage Gain | 32.2 dB | 34.4 dB | 36.1 dB | |||
Output Circuitry | Class B | 2-tier Class H | 2-tier Class H | |||
Power Requirements (1/8 power, pink noise at 4 ohms, 120V) | 6.3 A | 6 A | 10.1 A | |||
Frequency Response | 20 Hz–20 kHz, +0, -1 dB | |||||
Dynamic Headroom (4 ohms) | 2 dB | |||||
Input Impedance | Greater than 20 kΩ (balanced) | |||||
Maximum Input Level | +24 dBu (16 V rms) | |||||
Input Connectors (each channel) | 3-pin XLR and 1/4-inch TRS, balanced, parallel Phono, unbalanced |
|||||
Output Connectors (each channel) | Speakon®, 1/4-inch, Binding posts | |||||
Amplifier and Load Protection | Short circuit, open circuit, thermal, RF protection Load protected against DC faults |
|||||
Front Panel Controls and Indicators | Gain controls, 21 detents Red CLIP LEDs, proportional, 0.1% THD threshold Green SIGNAL LEDs, threshold 35 dB below clipping Blue POWER LED, AC on |
|||||
Rear Panel Controls | Full Range / Crossover switch 100 Hz, 3rd order LP (sub), 2nd order HP (top) |
|||||
Product Dimensions (H×W×D) | 89 × 483 × 257 mm 3.5 × 19 × 10.1 in |
|||||
Carton Dimensions (H×W×D) | 610 × 380 × 153 mm 24 × 15 × 6 in |
|||||
Net Weight | 12.1 kg / 27 lb | 12.6 kg / 28 lb | 120V model: 7 kg / 15.5 lb 230V model: 7.5 kg / 16.5 lb |
|||
Shipping Weight | 13.2 kg / 29.1 lb | 14.5 kg / 32 lb | 120V model: 9.3 kg / 20.5 lb 230V model: 9.75 kg / 21.5 lb |
|||
Agency Approvals | UL, CE, RoHS/WEEE Compliant | |||||
AC Current and Heating, 120 VAC (multiply current by 0.5 for 230 VAC) |
GX3 | GX5 | GX7 | |||
Operating Condition | AC amps | BTU/hour | AC amps | BTU/hour | AC amps | BTU/hour |
Idle | 0.2 | 44 | 0.3 | 60 | 0.6 | 82 |
8 + 8 ohms, 1/8 power 1 | 4.1 | 904 | 3.3 | 734 | 6.7 | 1169 |
8 + 8 ohms, 1/3 power 2 | 6.1 | 1160 | 8.5 | 1456 | 13.3 | 1807 |
8 + 8 ohms, full power 3 | 9.75 | 1109 | 16.2 | 1891 | 26.5 | 2167 |
4 + 4 ohms, 1/8 power 1 | 6.3 | 1515 | 5.8 | 1160 | 10.1 | 1963 |
4 + 4 ohms, 1/3 power 2 | 9.4 | 2105 | 11.2 | 2162 | 18.5 | 2612 |
4 + 4 ohms, full power 3 | 15.0 | 2297 | 24.5 | 3754 | 40 | 4478 |
1 1/8 power represents typical maximum operating conditions
2 1/3 power represents over-driven program levels
3 Full power is breaker limited to short periods
For 230 V, multiply AC current by 0.5
For 100 V, multiply AC current by 1.25
All specifications are subject to change without notice.
Shipping Policy
VMT offers insured shipping extra to almost all Pin Codes in the country. We use the standard shipping mode and operate via our logistics partners who are amongst the best in the country for product shipping.
7 Day Easy-Refund Policy
Receive a refund for any reason if you return a product within 7 days of your delivery date that is still in brand new condition with the original packaging and with all items delivered with the product.
Missing/Damaged Fee
For products returned with the following conditions below, a 15% product missing/damaged fee will be deducted from the refunded amount.
- Wear and tear on the product like small scratches and dents
- Missing box items like an owner’s manual or software/ driver CD’s, etc.
- Damage or dents incurred during the return shipping process
- Tampered / Missing barcode from the product
Refunds will not be processed for products with more significant damage or missing significant accessories, like connector cables, or DC power supplies.
Return Policy Exceptions
- Products received with physical damage must be reported to VMT within 2 days of the delivery date.
- Products received with missing accessories should be reported within 5 days of the delivery date. Claims made post this period will not be honoured.
- Products purchased as Open Box cannot be returned. All Open Box sales are final. Open Box products have been tested and are guaranteed to be functional. If you have a reason to believe that your open box product is non-functional, please contact us on helpdesk@VMT.com with video evidence. Product malfunction for open-box products is covered by VMT, and they enjoy a 2-year Standard VMT warranty as all other products.( open Box B stock products are covered by a 1 year warranty)
- We do not accept returns for the following items:
- Opened software products.
- All products with manufacturer seal. Once the seal is opened it cannot be assigned to another user, and hence vmt cannot accept the return unless there is a case of product malfunction.
- Audio Interfaces, Midi Keyboards or any other product that entails registration in order to be used. Once registered, the product cannot be reassigned, and hence VMT cannot accept the return.
- Gift Cards and Gift Vouchers
- Products damaged due to the use of an inappropriate power supply or products that were damaged due to voltage stability issues will not be accepted as returns.
- Products that show wilful damage will not be accepted as returns.
Note* - In case VMT is unable to pick-up your shipment due to certain unforeseen circumstance, you may have to ship the products to our facility. The logistic charges involved in these cases would be refunded back to you after the product reaches us.
Return Shipping
VMT shall bear the cost of the return shipping to all Pin Codes that can avail free shipping. In case VMT cannot arrange a pickup, you can send the shipment back by requesting a Free Shipping Coupon (Due to lockdowns and limited service in certain areas) For products that weigh over 30 Kg, the cost of shipping will be borne by the customer.
Return Process
If you would like to return a product, it is required to call us as soon as possible at +91-22-43432222. All returns must be authorised and the return shipment must be mailed within 15 days of receiving the original shipment.
The refund will be initiated only after the package has been received back at our facility. The refunded amount will be transferred, as per banking and payment gateway norms, within 5 to 7 business days of the receipt of the returned shipment.
VMT’s address : Send your return to:
Vardhaman Megatech Pvt. Ltd,
The Online Returns Dept., Vardhaman House, DL Road, Kalachowki, Mumbai 400033