LUCIA 120/2
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
Our Categories
Latest Products

LUCIA 120/2

Available: In Stock
Rs. 52,300.00
Image
  • Order within

Product Features

  • Compact amplifier which offers full output power across a range of loads with 2 x 60 W into 8, 4 or 2 Ohms

  • Comprehensive on-board DSP with loudspeaker processing and innovative features which enhance performance and simplifies system design and commissioning

  • Configuration software wizard for initial set-up and advanced editor for preset configuration (LUCIA connection via USB) available for Windows and Mac

  • Energy efficient with Energy Star certification for supreme green credentials and exceptionally low lifetime running costs

  • Automatic Dynamic Loudness Contouring adapts to optimize performance at any output level

  • Comprehensive DSP features with per-channel presets for high-pass filter, parametric EQ, multi-band compressor and look-ahead limiter

  • Optimized presets available for a wide range of loudspeaker models for fast configuration

  • Enhanced Bass Profile for extended LF response with small loudspeakers

  • Proprietary Auto Load Sense automatically sets VPL (Voltage Peak Limiter) for optimum performance with any connected load

  • Efficient Class-D amplifier with low distortion and minimal heat dissipation

  • Compact form factor in a half-rack, 1U chassis with supplied bracket for discreet on-wall mounting

  • Configurable GPIO port for remote control (e.g. wall panel) for channel switching, level control and integration with paging systems

  • Comprehensive circuit protection for fail safe operation, including short circuit, thermal and under-voltage protection

  • Universal power supply supports 100 - 240 V AC at 50 or 60 Hz

  • Intelligent fan control for silent operation at idle and at lower output levels

  • Front panel power and fault indication as well as per-channel signal LED and attenuation knob

  • Balanced high quality analog inputs and amplifier outputs on detachable screw terminals

  • Parallel analogue input on unbalanced RCA connectors with optimized gain for mobile and other unbalanced sources

  • Rackmount kit, pole-mount kit and wall panel kits available as accessories

Specification

General
Number of amplifier channels

2

Max total output all channels driven

120 W

Max output voltage per channel

31 V peak

Max output current per channel

5.5 Arms

Max output power (all channels driven)
2 ohms

60 W

4 ohms

60 W

8 ohms

60 W

16 ohms

30 W

Performance
THD 20 Hz - 20 kHz at 1 W into 8 ohms

<0.3%

THD at 1 kHz and 1 dB below clipping

<0.2%

Signal to Noise Ratio

>98 dBA

Channel separation (Crosstalk) at 1 kHz

>60 dBA

Frequency Response

5 Hz - 22 kHz

Input impedance

10 kOhm

Common Mode Rejection (CMR)

40 dB

Gain, Sensitivity and Limiters
VPL for 16 ohm mode

31 Vpeak

VPL for 8 ohm mode

31 Vpeak

VPL for 4 ohm mode

22 Vpeak

VPL for 2 ohm mode

15 Vpeak

Sensitivity, balanced input

4 dBu / 1.23 Vrms

Sensitivity, RCA input

-2 dBu / 0.62 Vrms

Input headroom for clip, balanced 1

12 dBu / 3.09 Vrms

Input headroom for clip, RCA 1

6 dBu / 1.55 Vrms

Connectors and Buttons
Input connectors (per ch.)

3 - pin detachable screw terminals, electronically balanced

Input connectors (ch. 1 & 2)

Unbalanced RCA type

Output connectors (per ch.)

2 - pin detachable screw terminals

GPI (power control input) 2

2 channels of voltage sense type. 4 pins in a detachable screw terminal. Default for gain.

GPO (power state output) 2

Contact closure type, 2 pins in a detachable screw terminal Default for external monitoring of fault/protection/power off

RS232

Can be controlled and monitored by third parties via RS232 using both the GPI pins

USB

For firmware update and configuration with the Application Browser software

Level adjustment (per channel)

Front panel potentiometer, detented from -inf to 0 dB

Processing Features
Input processing block 3

4 EQ sections per input

Mix matrix routing block 3

2 in - 2 out mix-matrix controllable from GPI

Output processing block 3

4 EQ sections per output (presets available for many loudspeakers) User adjustable output look ahead limiter ADLC (Adaptive ISO 226 compensation)

Latency from any input to any output

User adjustable from 9.15 to 137 ms

Power
Nominal voltage

100 – 240 VAC

Operating voltage

85 – 265 VAC

Standby consumption

<1 W

Mains connector

IEC inlet

Cooling

One fan, no filter required, front to rear airflow, temperature controlled speed. Can stay off if the sustained power average stays below 2 × 6 W and the ambient temperature is below 25 C

Auto mode

The power state is controled automatically by the audio signal

Dimensions
Dimensions

W: 216 mm (8.5”), H: 44 mm (1 U), D: 280 mm (11”)

Weight
Weight

1.9 kg (4.2 lbs)

Finish
Finish

Black aluminum front and black steel chassis

Approvals
Approvals

CE, CSA, CCC, PSE, FCC, Energy Star

Product Features

  • Compact amplifier which offers full output power across a range of loads with 2 x 60 W into 8, 4 or 2 Ohms

  • Comprehensive on-board DSP with loudspeaker processing and innovative features which enhance performance and simplifies system design and commissioning

  • Configuration software wizard for initial set-up and advanced editor for preset configuration (LUCIA connection via USB) available for Windows and Mac

  • Energy efficient with Energy Star certification for supreme green credentials and exceptionally low lifetime running costs

  • Automatic Dynamic Loudness Contouring adapts to optimize performance at any output level

  • Comprehensive DSP features with per-channel presets for high-pass filter, parametric EQ, multi-band compressor and look-ahead limiter

  • Optimized presets available for a wide range of loudspeaker models for fast configuration

  • Enhanced Bass Profile for extended LF response with small loudspeakers

  • Proprietary Auto Load Sense automatically sets VPL (Voltage Peak Limiter) for optimum performance with any connected load

  • Efficient Class-D amplifier with low distortion and minimal heat dissipation

  • Compact form factor in a half-rack, 1U chassis with supplied bracket for discreet on-wall mounting

  • Configurable GPIO port for remote control (e.g. wall panel) for channel switching, level control and integration with paging systems

  • Comprehensive circuit protection for fail safe operation, including short circuit, thermal and under-voltage protection

  • Universal power supply supports 100 - 240 V AC at 50 or 60 Hz

  • Intelligent fan control for silent operation at idle and at lower output levels

  • Front panel power and fault indication as well as per-channel signal LED and attenuation knob

  • Balanced high quality analog inputs and amplifier outputs on detachable screw terminals

  • Parallel analogue input on unbalanced RCA connectors with optimized gain for mobile and other unbalanced sources

  • Rackmount kit, pole-mount kit and wall panel kits available as accessories

Specification

General
Number of amplifier channels

2

Max total output all channels driven

120 W

Max output voltage per channel

31 V peak

Max output current per channel

5.5 Arms

Max output power (all channels driven)
2 ohms

60 W

4 ohms

60 W

8 ohms

60 W

16 ohms

30 W

Performance
THD 20 Hz - 20 kHz at 1 W into 8 ohms

<0.3%

THD at 1 kHz and 1 dB below clipping

<0.2%

Signal to Noise Ratio

>98 dBA

Channel separation (Crosstalk) at 1 kHz

>60 dBA

Frequency Response

5 Hz - 22 kHz

Input impedance

10 kOhm

Common Mode Rejection (CMR)

40 dB

Gain, Sensitivity and Limiters
VPL for 16 ohm mode

31 Vpeak

VPL for 8 ohm mode

31 Vpeak

VPL for 4 ohm mode

22 Vpeak

VPL for 2 ohm mode

15 Vpeak

Sensitivity, balanced input

4 dBu / 1.23 Vrms

Sensitivity, RCA input

-2 dBu / 0.62 Vrms

Input headroom for clip, balanced 1

12 dBu / 3.09 Vrms

Input headroom for clip, RCA 1

6 dBu / 1.55 Vrms

Connectors and Buttons
Input connectors (per ch.)

3 - pin detachable screw terminals, electronically balanced

Input connectors (ch. 1 & 2)

Unbalanced RCA type

Output connectors (per ch.)

2 - pin detachable screw terminals

GPI (power control input) 2

2 channels of voltage sense type. 4 pins in a detachable screw terminal. Default for gain.

GPO (power state output) 2

Contact closure type, 2 pins in a detachable screw terminal Default for external monitoring of fault/protection/power off

RS232

Can be controlled and monitored by third parties via RS232 using both the GPI pins

USB

For firmware update and configuration with the Application Browser software

Level adjustment (per channel)

Front panel potentiometer, detented from -inf to 0 dB

Processing Features
Input processing block 3

4 EQ sections per input

Mix matrix routing block 3

2 in - 2 out mix-matrix controllable from GPI

Output processing block 3

4 EQ sections per output (presets available for many loudspeakers) User adjustable output look ahead limiter ADLC (Adaptive ISO 226 compensation)

Latency from any input to any output

User adjustable from 9.15 to 137 ms

Power
Nominal voltage

100 – 240 VAC

Operating voltage

85 – 265 VAC

Standby consumption

<1 W

Mains connector

IEC inlet

Cooling

One fan, no filter required, front to rear airflow, temperature controlled speed. Can stay off if the sustained power average stays below 2 × 6 W and the ambient temperature is below 25 C

Auto mode

The power state is controled automatically by the audio signal

Dimensions
Dimensions

W: 216 mm (8.5”), H: 44 mm (1 U), D: 280 mm (11”)

Weight
Weight

1.9 kg (4.2 lbs)

Finish
Finish

Black aluminum front and black steel chassis

Approvals
Approvals

CE, CSA, CCC, PSE, FCC, Energy Star

Shipping Policy

VMT offers free insured shipping to almost all Pin Codes in the country. We use the standard shipping mode and operate via our logistics partners who are amongst the best in the country for product shipping. 

7 Day Easy-Refund Policy

Receive a refund for any reason if you return a product within 7 days of your delivery date that is still in brand new condition with the original packaging and with all items delivered with the product.

Missing/Damaged Fee

For products returned with the following conditions below, a 15% product missing/damaged fee will be deducted from the refunded amount.

  • Wear and tear on the product like small scratches and dents
  • Missing box items like an owner’s manual or software/ driver CD’s, etc.
  • Damage or dents incurred during the return shipping process
  • Tampered / Missing barcode from the product

Refunds will not be processed for products with more significant damage or missing significant accessories, like connector cables, or DC power supplies.

Return Policy Exceptions

  • Products received with physical damage must be reported to VMT within 2 days of the delivery date.
  • Products received with missing accessories should be reported within 5 days of the delivery date. Claims made post this period will not be honoured.
  • Products purchased as Open Box cannot be returned. All Open Box sales are final. Open Box products have been tested and are guaranteed to be functional. If you have a reason to believe that your open box product is non-functional, please contact us on helpdesk@VMT.com with video evidence. Product malfunction for open-box products is covered by VMT, and they enjoy a 2-year Standard VMT warranty as all other products.( open Box B stock products are covered by a 1 year warranty) 
  • We do not accept returns for the following items:
    • Opened software products.
    • All products with manufacturer seal. Once the seal is opened it cannot be assigned to another user, and hence vmt cannot accept the return unless there is a case of product malfunction.
    • Audio Interfaces, Midi Keyboards or any other product that entails registration in order to be used. Once registered, the product cannot be reassigned, and hence VMT cannot accept the return.
    • Gift Cards and Gift Vouchers


  • Products damaged due to the use of an inappropriate power supply or products that were damaged due to voltage stability issues will not be accepted as returns.
  • Products that show wilful damage will not be accepted as returns. 

Note* - In case VMT is unable to pick-up your shipment due to certain unforeseen circumstance, you may have to ship the products to our facility. The logistic charges involved in these cases would be refunded back to you after the product reaches us.

Return Shipping

VMT shall bear the cost of the return shipping to all Pin Codes that can avail free shipping. In case VMT cannot arrange a pickup, you can send the shipment back by requesting a Free Shipping Coupon (Due to lockdowns and limited service in certain areas) For products that weigh over 30 Kg, the cost of shipping will be borne by the customer.

Return Process

If you would like to return a product, it is required to call us as soon as possible at +91-22-43432222. All returns must be authorised and the return shipment must be mailed within 15 days of receiving the original shipment.

The refund will be initiated only after the package has been received back at our facility. The refunded amount will be transferred, as per banking and payment gateway norms, within 5 to 7 business days of the receipt of the returned shipment.

VMT’s address : Send your return to:

Vardhaman Megatech Pvt. Ltd,

The Online Returns Dept., Vardhaman House, DL Road, Kalachowki, Mumbai 400033