ART XDirect™
Description
ART XDirect is an active direct box that converts instrument, line or speaker level signals into a balanced low impedance output. It has 0, minus 20 and minus 40 dB input attenuation, a phase switch and a ground lift. It runs on a 9 volt battery or phantom power. VMT supplies it with a GST invoice and shipping across India.
Key features
- Active DI with 1/4" TRS and XLR inputs
- Input attenuation: 0, minus 20 and minus 40 dB
- Output phase invert and ground lift switches
- Frequency response 10 Hz to 100 kHz
- 9V battery or 18 to 48V phantom power
- Weight 0.34 kg
Specifications
| Processor type | DI box |
|---|---|
| Connectors | 1/4" TRS and XLR in, XLR out |
| Built-in DSP | No |
| Needs phantom power | Yes |
| Inputs and outputs | 1/4" TRS or XLR in, 1 XLR out |
| Weight | 0.34 kg |
Manufacturer description
The Xdirect is a high quality interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input. The high impedance single-ended 1/4″ and XLR inputs are buffered and converted, by very low noise active electronics, into an isolated balanced low impedance signal source.
Specifications
Frequency Response 10Hz -100kHz, +/-.5dB @ +0dBu
Total Harmonic Distortion <.05% Typical
Dynamic Range>100dB typical
Maximum Input Level 4/+24/+44dBu
Maximum Output Level +6dBu (battery powered), +14dBu (phantom powered)
Input Connections ¼-inch TRS and XLR female unbalanced, 470k Ω
Output Connections XLR male balanced, <600 Ω
Output Phase Switchable, Normal/Invert
Ground Lift Switchable, fully isolates inputs from chassis and output
Input Attenuation Switchable, (0dB, -20dB, -40dB)
Filter Type / Response Switchable, Low Pass, -3dB @30kHz
Power Requirements 9volt @3.5ma (internal battery) or 18VDC-48VDC @9.5ma (phantom power)
Dimensions 1.75″H x 4.2″W x 3.5″D (44.5mm x 107mm x 89mm)
Weight0.75 lbs (0.34 kg)
